Description

Getting ISO certified is only the first milestone. Within a year, the certification body comes back to check that your management system is still working, and it keeps coming back every year until the certificate is renewed. That visit is the surveillance audit, and it decides whether your organization keeps its certificate. This page explains what a surveillance audit is, what auditors look at, how it differs from internal audits and recertification, and how TIBD helps organizations in Thailand prepare for it.

What is a surveillance audit?

A surveillance audit is a periodic audit carried out by a certification body (CB) after an organization has been certified. Its purpose is to confirm that the certified management system still meets the requirements of the standard, is being applied in day-to-day operations, and continues to improve. It is not a repeat of the initial certification audit. Instead, it samples parts of the system and follows up on what was found last time.

The rules certification bodies follow worldwide come from ISO/IEC 17021-1. Under that standard, surveillance audits must take place at least once every calendar year, except in recertification years, and the first surveillance audit must be held no later than 12 months after the certification decision.

Where surveillance audits sit in the three-year certification cycle

Management system certificates such as ISO 9001 are valid for three years. Within that cycle there are three types of external audit.

WhenAuditPurpose
Before certificationInitial certification audit (Stage 1 and Stage 2)Review documented readiness, then audit full implementation
Year 11st surveillance auditSample part of the system and verify corrective actions from the previous audit
Year 22nd surveillance auditCover the remaining processes and check continual improvement
Before expiryRecertification auditAudit the whole system again to issue a new three-year certificate

Some certification bodies schedule surveillance more often, for example every six months, depending on the size of the organization, the risk of its processes and the results of earlier audits. A poor result in one visit usually means a wider audit scope in the next.

Surveillance audit vs internal audit vs recertification audit

Internal auditSurveillance auditRecertification audit
Who auditsThe organization’s own auditors or a hired consultantCertification bodyCertification body
ScopeSet by the organization’s internal audit programmePart of the system, rotating to full coverage over three yearsThe whole system
OutcomeImprovement actions before the external auditCertificate maintained, or suspended if nonconformities are not resolvedNew certificate for another cycle

An internal audit is your rehearsal. ISO 9001:2015 clause 9.2 requires internal audits at planned intervals, and the results of internal audits and management review (clause 9.3) are among the first records a surveillance auditor asks to see.

Which standards use surveillance audits?

Almost every accredited certification scheme works the same way. In the health, food and beauty industries, the most common are:

  • ISO 9001:2015 quality management systems
  • ISO 14001:2015 environmental management systems
  • ISO 45001:2018 occupational health and safety management systems
  • ISO 22716:2007 cosmetics good manufacturing practices
  • ISO 13485:2016 quality management for medical devices
  • Food safety schemes such as GMP and HACCP certified by private certification bodies

Organizations holding several certificates, for example ISO 9001 with ISO 14001 and ISO 45001, often combine their surveillance visits into one integrated audit. That saves time, but documents and responsibilities must be organized to serve all standards at once.

What auditors check during a surveillance audit

ISO/IEC 17021-1 lists the topics every surveillance audit has to cover, so you can predict what the auditor will ask for:

  1. Internal audits and management review since the last visit
  2. Actions taken on nonconformities raised at the previous audit, and whether they worked
  3. Handling of complaints
  4. Progress towards quality objectives and performance indicators
  5. Planned continual improvement activities
  6. Operational control of key processes, from purchasing and production to inspection and delivery
  7. Changes such as a new site, a new production line, new products or new management
  8. Correct use of certification marks and references to certification

When TIBD prepares clients for these visits, the gaps we see most often are internal audits postponed until they never happen, outdated document versions in use on the shop floor, missing calibration records, training without evidence of effectiveness, and last year’s nonconformities closed on paper without fixing the root cause.

Surveillance audit preparation checklist

Before the certification body arrives, make sure you can answer yes to each of these questions:

  • Has the internal audit programme been completed for every process due this year, with findings recorded and followed up?
  • Has management review been held, with documented inputs, decisions and actions?
  • Is every nonconformity from the last external audit closed, with evidence that the root cause was removed?
  • Are the documents used on the floor the current approved versions?
  • Are calibration, maintenance and training records complete for the period since the last visit?
  • Have customer complaints been logged, investigated and answered?
  • Have significant changes to sites, products, processes or key people been reported to the certification body?
  • Do staff who will meet the auditor know where records are kept and how to explain their part of the process?

Major and minor nonconformities

  • Major nonconformity: a finding that affects the ability of the management system to achieve its intended results, such as no internal audit for a whole year or a key process with no control. The certification body must verify the correction and corrective action before the certificate can be maintained.
  • Minor nonconformity: a finding that does not affect the system’s ability to achieve its intended results, such as a few unsigned records. The organization submits a corrective action plan and carries it out.

Every finding needs both a correction, which fixes the immediate problem, and a corrective action, which removes the cause so it does not happen again. If findings are not resolved within the time the certification body sets, or if the organization does not allow surveillance audits at the required frequency, the certificate can be suspended or withdrawn. That affects customer confidence and eligibility for contracts that require valid certification.

How TIBD helps: preparation consultant, not certification body

Impartiality rules prevent a certification body from consulting for the organizations it certifies. TIBD therefore works on your side. We make sure the system is genuinely ready before the auditors arrive, and we stand with your team on audit day. Our surveillance audit support covers:

  • Audit cycle planning: a calendar of internal audits, management reviews and certification body visits across the full three-year cycle
  • Pre-audit: an internal audit built around what the certification body will check, with a clear list of what to fix
  • Closing previous findings at the root cause, with evidence ready for the auditor
  • Training for internal auditors and frontline staff, with training records signed by our consultants
  • Coordination with the certification body and internal departments
  • Leading the audit together with your team and supporting answers to auditor questions
  • Post-audit corrective action plans written to address each finding, followed through until accepted

How we work

  1. Initial discussion: your standards, certification body, upcoming audit date and last audit report
  2. Gap assessment of documents and records against the standard and the surveillance audit topics
  3. Action plan and training to close priority gaps before audit day
  4. Mock audit run in the same format as the real visit
  5. Audit day support on site
  6. Follow-up on findings until the certification body accepts the corrective actions, then planning for the next cycle

Scope, timeline and fees are confirmed in a quotation after we understand your situation.

Who this service is for

  • ISO or GMP certified organizations approaching their annual surveillance audit
  • Companies whose management system coordinator has left with no handover
  • Organizations that received a major nonconformity last time and need it closed properly
  • Companies holding several standards that want one integrated system
  • Cosmetics, supplement and health product manufacturers whose customers or overseas partners ask for valid certificates

Why TIBD

TIBD’s standards and certification services are led by Khun Natchaphon Somrak (COO and Co-Founder), with a consulting team experienced in factories and laboratories across the health and beauty industry. We support the full certification journey, from building ISO 9001, ISO/IEC 17025, ISO 22716 and GMP systems to keeping certificates valid, so our advice fits real operations instead of adding paperwork.

Frequently asked questions

How often is a surveillance audit required?
At least once a year in the years between certification and recertification, under ISO/IEC 17021-1. Some certification bodies audit more often, depending on size and risk.

What happens if we fail a surveillance audit?
You receive nonconformities that must be resolved within the time the certification body sets. Unresolved major nonconformities, or refusing a scheduled surveillance audit, can lead to suspension or withdrawal of the certificate.

Does a surveillance audit cover the whole system?
No. Each visit samples part of the system plus mandatory topics such as internal audit results, management review and previous findings, so that the whole system is covered within the three-year cycle.

Does TIBD issue certificates?
No. TIBD is a consultant working for your organization. Certificates are issued by the certification body you choose.

What should we prepare before contacting TIBD?
Your current certificate, the latest audit report with any nonconformities, and your next audit date if it has been scheduled.

Prepare your next surveillance audit with TIBD

Don’t let findings pile up until audit day. Talk to TIBD’s consulting team to plan your surveillance cycle and keep your certification valid. Contact TIBD to get started.

References

ISO/IEC 17021-1:2015 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements.
ISO 9001:2015 Quality management systems — Requirements.
ISO 19011:2018 Guidelines for auditing management systems.

Apply for Surveillance Audit Service

If you have any questions or would like to receive a free consultation regarding Surveillance Audit Service, or if you would like to visit us in person in Bangkok, Thailand, you are warmly welcomed and feel free to contact us via the contact form below.

Area of interest (optional)